期刊論文 Journal Publication

92. 楊大和，2023，精實生產的起源，品質與效率學刊，2023年9月。(MOST-109-2221-E-006 -152 -MY3)

91. Lee, C.Y., Lin, Y.L., Lin, S.H., and Yang*, T., 2023, Virtual material quality investigation system, IEEE Transactions on Engineering Management, to appear. https://doi.org/10.1109/TEM.2022.3183628 (SCI) (MOST-109-2221-E-006 -152 -MY3 and MOST110-2221-E-002-163)

90. Yang, T., Wang, M.-C. and Kuo*, Y., 2023, A study of the operator assignment problem in powder-coating processing using simulation optimization", Robotic Intelligence and Automation, Vol. 13, No. 3, June. https://doi.org/10.1108/RIA-01-2023-0003 (SCI) (MOST-109-2221-E-006 -152 -MY3 and MOST-110-2622-E-006-013) 

89. Lee, C.Y., Lin, Y.L., Lin, S.H., and Yang*, T., 2022, Virtual material quality investigation system, IEEE Transactions on Engineering Management, to appear. https://doi.org/10.1109/TEM.2022.3183628 (SCI) (MOST-109-2221-E-006 -152 -MY3 and MOST110-2221-E-002-163)

88. Kuo, Y., Yang, T. and Huang, T.-L., 2022, Optimizing U-shaped production line balancing problem with exchangeable task locations and walking times, Applied Sciences, Vol. 12, March, Article 3375. https://doi.org/10.3390/app12073375. (SCI) (MOST-109-2221-E-006-152-MY3)

87. Yang, T., Lin, S.-Y., Hung, Y.-S., and Hong*, C.-C., 2022, A study on the optimization of in-process inspection procedure for active pharmaceutical ingredients manufacturing process, Sustainability, Vol. 14, March, Article 3706. https://doi.org/10.3390/su14063706. (SCI) (MOST-109-2221-E-006-152-MY3)

86. Hung, Y.-H., Huang, G.-C. and Yang*, T., 2022, A simulation study on CONWIP system design for bicycle chain manufacturing, European Journal of Industrial Engineering, Vol. 16, No. 1, January, 31–40. DOI: 10.1504/EJIE.2022.10038940 (SCI) (MOST-109-2221-E-006-152-MY3)

85. Wang, P.-S., Lin, C.-C., and Yang*, T., 2021, A study on Shojinka design for automobile engine piston-rod manufacturing, Computers & Industrial Engineering, Vol. 15, February, 106974. https://doi.org/10.1016/j.cie.2020.106974 

84. Tang, L., Yang, T., Ma*, Y., and Tu, Y., 2020, Supply chain information sharing under consideration of bullwhip effect and system robustness, Flexible Services and Manufacturing Journal, May, 1-44. https://doi.org/10.1007/s10696-020-09384-6 

83. Yang*, T., Wen, Y., Hsieh, Z. and Zhang, J., 2020, A lean production system design for semiconductor crystal-ingot pulling manufacturing using hybrid Taguchi method and simulation optimization, Assembly Automation, Vol. 40, No. 3, May, pp. 433-445. https://doi.org/10.1108/AA-11-2018-0193 (SCI)

82. Yang*, T., Hung, Y.-H., Huang, G.-C., 2019, A simulation study on CONWIP system design for bicycle chain manufacturing, IFAC PapersOnLine,Vol. 52,No. 13, 2477–2481. https://doi.org/10.1016/j.ifacol.2019.11.578

81. Wang, P.S., Yang*, T. and Yu, L.C., 2018, Lean-pull strategy for order scheduling problem in a multi-site semiconductor crystal ingot-pulling manufacturing company, Computers & Industrial Engineering, Vol. 125, November, 545-562.

80. Yang*, T. and Su, C.-T., 2018, The analysis of a factorial experiment with missing data using neural networks, Nihon University College of Economics Research Bulletin-Liberal Arts (日本大学経済学部「研究紀要」), No. 86, September, pp. 49-57.

79. Liu, Y.-S., Tang, L.-N., Ma, Y.-Z., and Yang*, T., 2018, TFT-LCD module cell layout design using simulation and fuzzy multiple attribute group decision-making approach, Applied Soft Computing, Vol. 68, July, 873-888.

78. 潘宥亦、馬瀰嘉*、楊大和，急診室醫師排班問題之研究，智慧科技與應用統計學報，第16卷第1期，2018 年 6 月1-18頁。

77. 王鵬森、楊大和*、陳怡如，營造業趕工計畫最佳化人力數量之研究，南台學報社會科學類 第3卷第1期 2018年6月55-72頁。

76. Zhang, J.X., Ma*, Y.Z., Yang, T., Liu, L.J., 2017 , Multi-objective simulation optimization and uncertainty analysis through stochastic kriging , Simulation Modelling Practice and Theory, Vol. 79, December, 69-86.

75. Wang, P.S., Yang*, T. and Chang, M.C., 2017 , Effective layout designs for Shojinka control problem from TFT-LCD module assembly line, Journal of Manufacturing Systems. , Journal of Manufacturing Systems, Vol. 44, Part 1, July, 255-269.

74. Su*, C.T., Hsu, C.C., Yang, T., Hsu, H.P., 2017 , Optimization of solder volume in printed circuit board assembly through an operating window experiment—a case study, Experimental Techniques. , Experimental Techniques, Vol. 41, No. 3, May/June, 309-316.

73. Kuo, Y., Yang*, T., Parker, D., and Sung, C.H., 2016 , Integration of customer and supplier flexibility in a make-to-order industry. , Industrial Management & Data Systems, , Vol. 116, No. 2, March, 213-235.

72. Yang*; T., Kuo, Y., Hsieh, C.-H., and Ge, W.-C., 2016 , An exploratory study of virtual cell design for thin film transistor–liquid crystal display (TFT-LCD) array manufacturing , International Journal of Advanced Manufacturing Technology, Vol. 83, No. 1-4, March, 633-644.

71. Yang*, T., Chen, M.-C., Chan, F.T.S., Cho, C., and Kumar, V.,2015 , Mathematical problems in emerging manufacturing systems management. , Mathematical Problems in Engineering, Vol. 2015 (March), Article ID 680121, 2 pages

70. Wang, T.-K., Yang*, T., Yang, C.-Y., Chan, F.T.S., 2015 , Lean principles and simulation optimization for emergency department layout design , Industrial Management & Data Systems, Vol. 115, No. 4, May, 678-699.

69. Lu*, J.-C. and Yang, T., 2015 , Implementing lean standard work to solve a low work-in-process buffer problem in a highly automated manufacturing environment , International Journal of Production Research, Vol. 53, No. 8, April, 2285-2305.

68. Yang, T., Kuo*, Y., D. Parker, Chen, K.-H., 2015 , A multiple attribute group decision making approach for solving problems with the assessment of preference relations , Mathematical Problems in Engineering, Vol. 2015 (March), Article ID 849897, 10 pages

67. Yang, T., Wang, T.K., Li, C.W., and Su, C.L., 2015 , The optimization of total laboratory automation by simulation of a pull-strategy , Journal of Medical Systems, Vol. 39, No. 1 (Article 162), January, 1-12.

66. Yang, T., Kuo*, Y., Su, C.T., and Hou, C.-L., 2015 , Lean production system design for fishing net manufacturing using lean principles and simulation optimization , Journal of Manufacturing Systems, Vol. 34, No. 1, January, 66-73.

65. Wang, T.K., Chan, F.T.S., and Yang, T., 2014 , The integration of group technology and simulation optimization to solve the flow shop with highly variable cycle time process: a surgery scheduling case study , Mathematical Problems in Engineering, Vol. 2014 (September), Article ID 796035, 11 pages

64. Su, C.T., Lin, H.-C., Teng, P.-W., and Yang, T., (2014) , Improving the reliability of electronic paper display using FMEA and Taguchi methods: a case study. , Microelectronics Reliability, Vol. 54, June–July, 1369–1377.

63. Chen, Y.-C., Su*, C.-T., and Yang, T., 2013. , Rule extraction from support vector machines by genetic algorithms. , Neural Computing and Applications, Vol. 23, No. 3~4, September, 729–739.

62. Hsieh, C.-H., Cho*, C., Yang, T. and Chang, T.-J., 2012. , Simulation study for a proposed segmented automated material handling system design for 300-mm semiconductor fabs. , Simulation Modelling Practice and Theory, Vol. 29, December, 18-31.

61. Wang*, I-L., Yang, T., and Chang, Y.-B.(2012) , Scheduling two-stage hybrid flow shops with parallel batch, release time, and machine eligibility constraints , Journal of Intelligent Manufacturing, Vol. 23, No. 6, December, 2271–2280

60. Lu, J.-C., Yang*, T., and Su, C.-T.(2012) , Analysing optimum push/pull junction point location using multiple criteria decision-making for multistage production system when considering system variability , International Journal of Production Research, Vol. 50, No. 19, October, 5523–5537

59. Hsieh, C.-H., Yang*, T., Su, C.-T., and Lin, C.-H.(2012) , The development of a hierarchical rough-cut capacity planning model and demand management system for fishing-net manufacturing , European Journal of Industrial Engineering, Vol. 6, No. 4, July, 422-440

58. Yang, T., Shen, Y.-A., Cho*, C., and Lin, Y.-R.(2012) , The use of a simulation, a hybrid Taguchi, and dual response surface methods in the automated material handling system tool-to-tool strategy for a 300-mm fab , European Journal of Industrial Engineering, Vol. 6, No. 3, July, 281-300

57. Yang*, T., Chang, Y.C., and Yang, Y.-H.(2012) , Fuzzy multiple attribute decision-making methods for a large 300-mm fab layout design , International Journal of Production Research, Vol. 50, No. 1, January, 119–132

56. Su*, C.-T., Wang, F.-F. and Yang, T. (2012) , Evolving optimal fuzzy-connective-based hierarchical aggregation networks using genetic algorithms , International Journal of Innovative Computing, Information and Control, Vol. 8, No. 1(B), January, 617–631

55. Yang*; T. and Shen, Y.-A.(2012) , Heuristic algorithms for a practical size dynamic parallel-machine scheduling problem: Integrated-circuit wire bonding , Production Planning & Control, Vol. 23, No. 1, January, 67–78

54. Yang, T., Wen*, Y.-F., Wang, F.-F. (2012) , Evaluation of robustness of supply chain information-sharing strategies using a hybrid Taguchi and multiple criteria decision-making method , International Journal of Production Economics, Vol. 134, No. 2, December, 458-466

53. Lee, C.-K., Shen, Y.-A., Yang*, T., and Tang, A.-L.(2011) , An effective two-phase approach in solving a practical multi-site order scheduling problem , Journal of the Chinese Institute of Industrial Engineers, Vol. 28, No. 7, October, 543-552

52. Yang*, T. and Shen, Y.-A. (2011) , The dynamic transfer batch-size decision for TFT-LCD Array manufacturing by artificial neural network , Computers & Industrial Engineering, Vol. 60, No. 4, May, 769-776

51. Yang*, T., and Lu, J.-C. (2011) , The use of multiple attribute decision-making method and value stream mapping in solving pacemaker location problem , International Journal of Production Research, Vol. 49, No. 10, May, 2793-2817

50. Lu, J.-C., Yang*, T., Wang, C.-Y. (2011) , A lean pull system design analyzed by value stream mapping and multiple criteria decision-making method under demand uncertainty , International Journal of Computer Integrated Manufacturing, Vol. 24, No. 3, March, 211 - 228

49. Yang*; T., Hsieh, C.-H., and Cheng, B.-Y. (2011) , Lean-pull strategy in a reentrant manufacturing environment: A pilot study for TFT-LCD Array manufacturing , International Journal of Production Research, Vol. 49, No. 6, March, 1511-1529

48. Yang*, T., Cheng, Y.-T, and Shen, Y.-A. (2010) , The use of Mahalanobis distance in solving the sputtering process thin-film thickness uniformity quality problem , Journal of the Chinese Institute of Engineers, Vol. 33, No. 7, November, 1021-1033

47. Yang*, T., Lu, J.-C. (2010) , A hybrid dynamic pre-emptive and competitive neural-network approach in solving the multi-objective dispatching problem for TFT-LCD manufacturing , International Journal of Production Research, Vol. 48, No. 16, 15 August, 4807–4828

46. Yang*, T. and Cheng, Y.-T. (2010) , The use of Mahalanobis Taguchi system to improve flip-chip bumping height inspection efficiency , Microelectronics Reliability, Vol. 50, No. 3, March, 407-414

45. Yang*; T. and Chen, C.-W. (2009) , An incentive pay system for project management based on responsibility assignment matrix and fuzzy linguistic variables , Expert Systems with Applications Vol. 36, No. 10, December, 12585-12591

44. Yang*; T. and Hsieh, C.-H. (2009) , Six-sigma project selection using national quality award criteria and Delphi fuzzy multiple criteria decision-making method , Expert Systems with Applications, Vol. 36, No. 4, May, pp. 7594-7603

43. Yang*, T. (2009) , An evolutionary simulation-optimization approach in solving parallel-machine scheduling problem – a case study , Computers and Industrial Engineering, Vol. 56, No. 3, April, 1126-1136

42. Kuo*, Y., Yang, T., and Huang, G.-W. (2008) , The use of grey relational analysis in solving multiple attribute decision-making problems , Computers and Industrial Engineering, Vol. 55, No. 1, August, pp. 80-93

41. Kuo*, Y., Yang, T., and Huang, G.-W. (2008) , The use of a grey-based Taguchi method for optimizing multi-response simulation problems , Engineering Optimization, Vol. 40, No. 6, June, pp. 517-528

40. Kuo*, Y., Yang, T., Cho, C. and Tseng, Y.-C. (2008) , Using simulation and multi-criteria methods to provide robust solutions to dispatching problems in a flow shop with multiple processors , Mathematics and Computers in Simulation, Vol. 78, No. 1, June, pp. 40-56

39. Kuo, Y. and Yang*, T. (2007) , Optimization of mixed-skill multi-line operator allocation problem , Computers and Industrial Engineering, Vol. 53, No. 3, October, pp. 386-393

38. Kuo*, Y., Yang; T., Peters; B.A., and Chang, I. (2007) , Simulation metamodel development using uniform design and neural network for the automated material handling system in semiconductor wafer fabrication , Simulation Modelling Practice and Theory, Vol. 15, No. 8, September, pp. 1002-1015

37. Chen*, M.-C. Yang, T., and Li, H.-C. (2007) , Evaluating the supply chain performance of IT-based inter-enterprise collaboration , Information & Management, Vol. 44, No. 6, September, pp. 524-534

36. Chen*, M.-C., Yang, T., and Yen, C.-T. (2007) , Investigating the value of information sharing in multi-echelon supply chains , Quality & Quantity, Vol. 41, No. 3, June, pp. 497-511

35. Yang*, T., Fu, H.P, and Yang, K.-Y. (2007) , An evolutionary-simulation approach for the optimization of multi-constant work-in-process strategy – A case study , International Journal of Production Economics, Vol. 107, No. 1, May, pp. 104-114

34. Yang*, T., Chen, M.-C. and Hung, C.-C. (2007) , Multiple attribute decision-making methods for the dynamic operator allocation problem , Mathematics and Computers in Simulation, Vol. 73, No. 5, January, pp. 285-299

33. Yang*, T. and Hung, C.-C. (2007) , Multiple-attribute decision making methods for plant layout design problem , 

Computer-Integrated Manufacturing, Vol. 23, No. 1, February, pp. 126-137

32. Yang*, T., Kuo, Y., and Cho, C. (2007) , A genetic algorithms simulation approach for the multi-attribute combinatorial dispatching decision problem , European Journal of Operational Research, Vol. 176, No.3, February, pp. 1859-1873

31. Kuo, Y. and Yang*, T. (2006) , A case study on the operator allocation decision for TFT-LCD inspection and packaging process , Journal of Manufacturing Technology Management, Vol. 17, No. 3, pp. 363-375

30. Yang*, T., Lin, H.-C. and Chen, M.-L. (2006) , Metamodeling approach in solving the machine parameters optimization problem using neural network and genetic algorithms: a case study , Robotics and Computer-Integrated Manufacturing, Vol. 22, No. 4, August, pp. 322-331

29. Cheng, Y.-T. and Yang*, T. (2005) , Simulation of design and analysis of a container reverse-logistics system , Journal of the Chinese Institute of Industrial Engineers, Vol. 22, No. 3, pp. 189-198

28. Yang*, T., Kuo, Y., and Chou, P. (2005) , Solving a multiresponse simulation problem using dual response system and scatter search method , Simulation Modelling Practice and Theory, Vol. 13, No. 4, June, pp. 356-369

27. Tsai, T.-N., Yang*, T., Hou, P.-A. (2005) , Neurofuzzy modeling of the reflow thermal profile for surface mount assembly , International Journal of Systems Science, Vol. 36, No. 2, February, pp. 89-101

26. Yang*, T., Tsai, T.-N. and Yeh, J. (2005) , A neural network-based prediction model for fine pitch stencil printing quality in surface mount assembly, , Engineering Applications of Artificial Intelligence, Vol. 18, No. 3, April, pp 335-341

25. Yang*, T., and Chou, P. (2005) , Solving a multiresponse simulation-optimization problem with discrete variables using a multiple-attribute decision-making method , Mathematics and Computers in Simulation, Vol. 68, No. 1, February, pp. 9-21

24. Tsai, T.-N. and Yang*, T. (2005) , A neuro-computing approach to the thermal profile control of the second-side reflow process in surface mount assembly , Journal of Manufacturing Technology Management, Vol. 16, No. 3, pp. 343-359

23. Yang*, T., Lee, R.-S., Chen, M.-C., and Chen, P. (2005) , Queueing Network Model for a Single-operator Machine Interference Problem with External Operations , European Journal of Operational Research, Vol. 167, No. 1, November, pp. 163-178

22. Yang*, T., Peters, B.A. and Tu, M. (2005) , Layout design for flexible manufacturing systems considering single-loop directional flow patterns , European Journal of Operational Research, Vol. 164, No. 2, July, pp. 440-455

21. Yang*, T., Kuo, Y., and Chang, I. (2004) , Tabu-search simulation optimization approach for flow-shop scheduling with multiple processors– a case study , International Journal of Production Research, Vol. 42, No. 19, October, pp. 4015-4030

20. Yang*, T. and Tsai, T.-N. (2004) , A neurofuzzy-based quality-control system for fine pitch stencil printing process in surface mount assembly , Journal of Intelligent Manufacturing, Vol. 15, No. 5, October, 711-721

19. Yang*, T. and Olmen, R.V. (2004) , Robust design for a multilayer ceramic capacitor screen-printing process case study , Journal of Engineering Design, Vol. 15, No. 5, October, pp. 447-457

18. Yang*, T. Lee, R.-S. and Hsieh, C. (2003) , Solving a process engineer's manpower-planning problem using analytic hierarchy process , Production Planning & Control, Vol. 14, No. 3, April–May, 266-272

17. Yang*, T., Chen, M.-C., and Su, C.-T. (2003) , Quality management practice in semiconductor manufacturing industries – empirical studies in Taiwan , Integrated Manufacturing Systems, Vol. 14, No. 2, pp. 153-159

16. Yang*, T. and Kuo, C. (2003) , A hierarchical AHP/DEA methodology for the facilities layout design problem , European Journal of Operational Research, Vol. 147, No. 1, May, pp. 128-136

15. Yang*, T., Fu, H.-P., and Yang, J. (2002) , A simulation-based dynamic operator assignment strategy considering machine interference – a case study on integrated circuit chip moulding operations , Production Planning & Control, Vol. 13, No. 6, September, pp. 541-551

14. Su, C.-T., Yang*, T., and Ke, C.-M. (2002) , A neural-network approach for semiconductor wafer post-sawing inspection , IEEE Transactions on Semiconductor Manufacturing, Vol. 15, No. 2, May, pp. 260-266

13. Yang*, T. and Tsai, T.-N. (2002) , Modeling and implementation of a neurofuzzy system for surface mount assembly defect prediction and control , IIE Transactions, Vol. 34, No. 7, July, pp. 637-646

12. Yang*, T. and Tseng, L.-P. (2002) , Solving a multi-objective simulation model using a hybrid response surface method and lexicographical goal programming approach-a case study on integrated circuit ink-marking machines , Journal of the Operational Research Society, Vol. 53, No. 2, February, pp. 211-221

11. Chen*, M.-C., and Yang, T. (2002) , Design of manufacturing systems by a hybrid approach with neural network metamodelling and stochastic local search , International Journal of Production Research, Vol. 40, No. 1, January, pp. 71-92

10. Tsai, T.-N., Liu, S.-Y., and Yang*, T. (2001) , A SMT soldering diagnosis system using neurofuzzy approach , International Journal of Fuzzy Systems, Vol. 3, No. 4, pp. 541-547

9. Yang*, T., Su, C.-T., and Feng, Y.-C. (2001) , In search of a product mix for semiconductor wafer fabrication facilities by a combined simulation/neural network approach , International Journal of Industrial Engineering, Vol. 8, No. 2, June, pp. 142-149

8. Yang*, T., Su, C.-T., and Hsu, Y.-R. (2000) , Systematic layout planning: a study on semiconductor wafer fabrication facilities , International Journal of Operations and Production Management, Vol. 20, No. 11, November, pp. 1360-1372

7. Lin, C., Yang*, T., Padillo, J.M., and Beres, D. (2000) , Interbay automated material handling system stocker design for wafer fabrication facilities , International Journal of Manufacturing Technology and Management, Vol. 1, No. 2/3, pp. 147-155

6. Yang, T., Rajasekharan, M., and Peters*, B.A. (1999) , Semiconductor fabrication facility design using a hybrid search methodology , Computers and Industrial Engineering, Vol. 36, No. 3, July, 565-583

5. Yang, T., and Peters*, B.A. (1998) , Flexible machine layout design for dynamic and uncertain production environments , European Journal of Operational Research, Vol. 108, No. 1, July, pp. 49-64

4. Rajasekharan, M., Peters*, B.A., and Yang, T. (1998) , A genetic algorithm approach to solve layout design problems in flexible manufacturing systems , International Journal of Production Research, Vol. 36, No. 1, January, pp. 96-110

3. Yang, T. and Peters*, B.A. (1997) , A spine layout design for semiconductor fabrication facilities containing automated material handling systems , International Journal of Operations and Production Management, Vol. 17, No. 5, May, pp. 490-501

2. Peters*, B.A. and. Yang, T. (1997) , Integrated facility layout and material handling system design in semiconductor fabrication facilities , IEEE Transactions on Semiconductor Manufacturing, Vol. 10, No. 3, August, pp. 360-369

1. Bao*, H.P., Soundar, P., and Yang, T. (1994) , Integrated approach to design and manufacturing of shoe lasts for orthopedic use , Computers and Industrial Engineering, Vol. 26, No. 2, April, pp. 411-421